Fuel Injection Systems
OE-approved fuel pumps and injectors for a high-quality, affordable vehicle repair


OE Approved
Remanufactured pumps and injectors approved by the leading OEMs

FULL-SERVICE SOLUTION
Full lineup of OE new, reman and repair solutions for petrol and diesel

Cost & Eco Friendly
Remanufactured units save valuable material, resources and money

Technical Support
Expert advice for a best-practice, right-1st-time fit
OE Approved Remanufacturing
As an approved remanufacturer for the leading OEMs – Bosch, Delphi, Denso, Continental/VDO, Stanadyne – and a supplier to the world’s top vehicle and engine manufacturers, our quality speaks for itself. See how we return a used part to their original specification by clicking below.


Fuel Up with Reman
We offer a wide range of OE-approved remanufactured fuel pumps and injectors for all makes and model. Whether it’s powered by diesel, petrol or a hybrid, or fitted to car, truck, bus, agricultural, industrial, rail or marine, old or new, we’ve got you covered.
Sectors we Cover
Car
LCV
Truck
Bus
Agricultural
Plant
Industrial
Rail
Marine
Defence

Full-Service Solution
As an authorised distributor for Bosch, Denso, Delphi and VDO/Continental, we also supply a full range of OE new, exchange and repair parts for diesel and GDi. Alongside our own reman, you can access a range of competitively priced solutions, without compromising on the quality of the product, or your service.
What's Different?
Whilst an injector from a non-authorised remanufacturer, or reconditioner, might look like Carwood, that’s where the similarities end. How they’re made are often worlds apart. So although it might cost a little more, it’s worth choosing a proven-quality, sustainable, and still competitively-priced OE-approved injector from Carwood.
OE-Approved
Remanufactured Injector
Remanufactured/
Reconditioned Injector


OE-Approved Remanufactured Injector

Approved by Bosch, Delphi, Denso & Continental

All wearable or out-of-spec components replaced with approved OE parts

Assembled by factory trained technicians in ISO14644 Class 7 clean rooms

100% end-of-line tested using OE-authorised test plans & equipment

Unique OE calibration code generated to realign timing & quantity of fuel

2-year unlimited mileage warranty & technical support for a best-practice job

ISO 9001:2015 & 14001:2015 certified
Remanufactured / Reconditioned Injector

ISO 9001:2015 & 14001:2015 certified

ISO 9001:2015 & 14001:2015 certified

ISO 9001:2015 & 14001:2015 certified

ISO 9001:2015 & 14001:2015 certified

ISO 9001:2015 & 14001:2015 certified
Cost and Environmentally Friendly
Our sustainable solutions are proven to perform just like the OE, sometimes better. Yet because we use the core, they help save the planet valuable resources, and you money. Read more about our ‘Quality parts that don’t cost the Earth’
Made in world-class facilities
With an ISO14644, Class 7 certified clean room, capable of filtering down to 0.5 microns, and a suite of over 25 OE test benches, our fuel systems facility in Birmingham, is widely regarded as one of the best.
Quick and accurate test and diagnostics
We’re an authorised distributor for Carbon Zapp diagnostic, test and calibration equipment too. With just one of their affordable and easy-to-use machines, workshops can quickly and accurately diagnose, test and repair, current and future-generation petrol and diesel systems.

Up your performance with our uprated fuel pump for BMW - PFP0261520520R
- Continuous 350bar max rail pressure across engine speed range = 75% increase v. standard pump
- 10% more fuel volume per pumping event
- Reduced clearances for better pumping efficiency & unwanted heat
- Plug & play with no modifications to engine wiring loom & hydraulic connections
Remanufacturing expertise
For non-OE service or obsolete product, we offer a full remanufacturing service. Using our technical expertise, built over years as an OE-approved supplier, we can reverse engineer any part, test plan or coding solution – restoring it to OE specification, even if the original blueprint is no longer available. Few, if any, have this capability.
Core is Core
We stock up to 10,000 old pumps and 60,000 injectors, for both our own reman programmes, and that of leading vehicle and engine manufacturers. But we’re always on the lookout for more, so if you buy or sell core, email us at [email protected]. Or for more on our specialist core services:
What Else We Offer
Off-the-shelf availability

Off-the-shelf availability
Expert technical support via dedicated hotline

Expert technical support via dedicated hotline
OE-matching warranty

OE-matching warranty
Online catalogue, odering and returns at CarwoodHub.co.uk

Online catalogue, odering and returns at CarwoodHub.co.uk
More Reading

Tech Tips
Check out our best-practice advise on servicing diesel and GDi. Learn More

Sustainability
Learn how we make “Quality parts that don’t cost the Earth”. Learn More

Injector Coding
Understand the importance of calibrating Common Rail injectors. Learn More

Full-Service Solution
Learn why new, reman and repair solutions make business sense. Learn More